GR5 Ti-6Al-4V
Titanium and Titanium alloy Sheets/Strips/Plates
Product Number: MK20130407
Product Name: GR5 (Ti-6Al-4V) Titanium alloy sheets / Strips /
Plates
Materials: Grade1, Grade2, Grade5, Grade7, Grade9
Specification:
|
Materials
|
Technological
|
Condition
|
Specification
|
Standard
|
|
Gr1
Gr2
Gr5
Gr7
Gr9
|
Hot rolling
4mm<Thickness<60mm
Cold rolling
0.3mm<thickness<4.0mm
|
RM
YM
|
0.3-0.5x 400-600 x 1500
0.6-0.8x 400-800 x 1200
0.9-6.0x400-1000x1000-3050
6.1-15x400-2000x 1000-4000
16-60 x 400-2800 x 1000-5600
|
ASTM B265
|
Reference standard:
ASTM Standards:3
Ø
E 8
Test Methods for Tension Testing of Metallic Materials
Ø
E 29
Practice for Using Significant Digits in Test Data to Determine Conformance
with Specifications
Ø
E 290
Test Methods for Bend
Ø
E 539
Test Method for X-Ray Fluorescence Spectrometric Analysis of 6Al-4V Titanium
Alloy
Ø
E 1409
Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium
Alloys by the Inert Gas Fusion Technique
Ø
E 1447
Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by
the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method
Ø
E 1941
Test Method for Determination of Carbon in Refractory and Reactive Metals and
Their Alloys
Ø
E 2371
Test Method for Analysis of Titanium and Titanium Alloys by Atomic Emission
Plasma Spectrometry
Ø
E 2626
Guide for Spectrometric Analysis of Reactive and Refractory Metals
Technical requirement:
Ø
The
grades of titanium and titanium alloy metal covered by this specification shall
conform to the chemical composition requirements prescribed in ASTM B265.
Ø
Dimensional
tolerances on titanium and titanium alloy material covered by this
specification shall be as specified in ASTM B265, as applicable.
Ø
Sampling
for Chemical Analysis:
Samples for chemical
analysis shall be representative of the material being tested. The utmost care
must be used in sampling titanium for chemical analysis because of its great affinity
for elements such as oxygen, nitrogen, and hydrogen. Therefore, in cutting
samples for analysis, the operation should be carried out insofar as possible
in a dust-free atmosphere. Chips should be collected from clean metal and tools
should be clean and sharp. Samples for analysis should be stored in suitable
containers.
Keywords
plate; sheet; strip; titanium; titanium alloys
Relation Products
|
Name
|
Materials
|
Standard
|
Specification
|
Price
|
|
Plate
|
GR2
|
ASTM B265
|
Thick:0.5-30mm
|
USD 22.5/KG
|
|
Tube
|
GR2
|
ASTM B337
|
OD 6-108mm
WT:0.8-10mm
|
USD 29/kg
|
|
Bars
|
GR2
|
ASTM B348
|
Dia 2.5-90mm
|
Titanium ant titanium alloy Bars/Rods/Billets
Titanium
Pipes/Tubes for heat exchangers
没有评论:
发表评论